- Transport students and customers in a safe, courteous manner, by following all traffic laws, Department of Transportation regulations, and local rules and regulations.
- Check and keep in proper working condition all safety equipment.
- Perform pre-trip inspections each day:
- Check oil, coolant level, belts, and anything else under the hood (checking for leaks of any kind).
- Check for body damage, tire pressure, broken lens caps, etc.
- Check emergency equipment for contents and condition of mounting as well as making sure they are in working order.
- Make sure the fire extinguisher is fully charged.
- Look inside the First Aid and Body Kits and check contents if not sealed.
- Open the reflector box and make sure you have three reflectors.
- Check windows are clean with no cracks.
- Ensure driver’s area is clear of all objects.
- Check all gauges for proper operating readings.
- Check to make sure all lights are in working order.
- Check to make sure the 2-way radio or phone is on and is in operating condition.
- Make a final check of all your gauges, mirrors, seat belt, and brakes before beginning route.
- At low speed, make an operating inspection by checking your brakes, steering and listen for smooth operation of the motor. Watch carefully for other vehicles as you pull away.
- Clean interior of bus when needed.
- Ensure that a list of approved loading zones for the route is kept in the vehicle.
- Preserve vehicle equipment and avoid excess service and repair cost by checking and filling out of daily maintenance reports.
- Be alert and on time when reporting for work, driving schedules and field trips, etc.
- Inform your Supervisor when bus is in need of maintenance and/or repairs.
- Fuel and keep proper records of fuel and mileage as required.
While Driving:
- Slow down and look in both directions before crossing a railroad.
- Use 4-ways when crossing a railroad track.
- Stop only at designated stops. No unauthorized stops allowed.
- No fueling with students or clients on board.
- Slow down to posted speed limit in a school zone when the lights are activated and use the 4-way flashers.
- Attend safety meetings as required.
- Encourage students to behave in a safe and orderly manner during transit.
- Inform school administration (as per district policy) in writing of any behavioral problems on the bus so that proper action can be taken.